Heat Transfer Fluids

XCELTHERM® MK1

Liquid or vapor phase to 750ºF (400ºC); chemical equivalent to DOWTHERM® A.*

XCELTHERM® LV1

Liquid or vapor phase to 700°F (370°C); biphenyl-free, non-hazardous alternative to DOWNTHERM™ A* & THERMINOL® VP-1† at rated temperatures

XCELTHERM® SST

High operating temperature of 675°F (357°C) at low pressure; liquid phase heat transfer fluid for demanding applications.

XCELTHERM® TPL

Direct replacement for Hydrogenated Terphenyl based heat transfer fluids, chemically equivalent to DOWTHERM™ RP* and THERMINOL® 66*. Fouling resistant synthetic for low pressure systems operating up to 650°F (345°C).

XCELTHERM® XT

High efficiency heating/cooling fluid with -70ºF to 650ºF range (-57ºC to 345ºC); liquid or vapor phase, 527ºF (275ºC) IPB.

XCELTHERM® XTE

Synthetic heating and cooling for operating temperatures of -70°F to 625°F (-57°C to 329°C), high heat transfer efficiency to reduce operating costs.

XCELTHERM® HTR

Liquid phase to 630ºF (330ºC); odorless high temperature synthetic with an economical price for use over 600ºF; no vapor pressure at rated temperatures.

XCELTHERM® 315

Economical synthetic oil rated to 550ºF (288ºC) with very high resistance to oxidation as well as high resistance to sludge and fouling.

XCELTHERM® 500

Heat/cool from –80ºF to 500ºF (-60ºC to 260ºC); non-toxic, odorless and food contact rated; High heat transfer for increased output.

XCELTHERM® 600

Premium thermal oil for use up to 600ºF (315ºC) that has a long life, is non-toxic and odorless; food contact rated, NSF (HT1 NSF No. 128011) FDA.

XCELTHERM® CA Plus

Targeted for use in heat transfer applications that require prolonged life in systems that are open to the atmosphere and subject to accelerated oxidation.

XCELTHERM® CA

Non-toxic, high purity, premium fluid that features superior economy.

XCELTHERM® HFF

High flash point of greater than 410°F (210°C) as measured by Pensky-Martens Closed Cup method (ASTM D93), petroleum based, non-toxic for use up to 600°F (315°C).

XCELTHERM® DCT

A high performing, low cost hot oil heat transfer fluid formulated for the die casting and injection molding industries. Xceltherm® DCT has excellent heat transfer efficiency and an extended operational life due to its inherent thermal stability. For use up to 600°F (315°C).

XCELTHERM® SX500

Silicone Heat Transfer Fluid

XCELTHERM® SX800

Silicone based for high thermal stability and oxidative resistance at high operating temperatures up to 750°F (400°C) with a low start-up temperature of under -40°F (-40°C).

XCELTHERM® ASP

Superior resistance to heat stress for long life with the economy needed to keep plant operations profitable. Highly efficient, it moves heat at an economic operating cost, too. We developed this fluid for the Asphalt Industry to be consistent with environmental leadership by being non-toxic, aromatic free, more efficient and higher performing. All aspects of XCELTHERM® manufacturing and packaging processes are controlled by a stringent ISO 9001 quality program. Backed by a high degree of technical support and service, our heat transfer fluids are at the forefront of the latest thermal fluid technologies.

Diphenyl Oxide (DPO)

Chemical Intermediate, Heat Transfer Fluids, and/or process fluids

Biphenyl (Diphenyl)

Used as a Heat Transfer Fluid as an Intermediate for organic chemicals.

XCELTHERM® LT

A highly compatible flush fluid to cleanly wash out used and degraded fluid from moderately sludged or viscous systems. For full system flush, can be run for a week or more just as heat transfer fluid before draining.

XCELTHERM® FF

An aromatic solvent-based Flushing fluid for wash out of moderately sludged or viscous systems. Designed for and highly compatible with most other synthetic aromatic based heat transfer fluids including Dowtherm A but with maximum operation design up to 650 F/ 345 C. Fluid is designed for full system flush and production can be run for a week or more before draining.

XCELTHERM® CLX Cleaner

One step non-hazardous cleaning agent for systems with fouling and other degradation issues. Restores heat transfer and removes degradation material while running production. Add 15% of the system volume and run for up to two weeks at up to 550°F for removing carbon and sludge.

XCELTHERM® TLX Cleaner

“Super” cleaning agent for systems with that require removal of heavily degraded fluid that has caused excessive carbon and sludge. This low temperature cleaning leaves the system with a bare metal finish on internal piping in only one day. Drain, flush and refill the system to return it to full efficiency.

XCELTHERM® Marine-S

A synthetic HTF specially formulated for use in the marine transportation industry. “Xceltherm® Marine S” has exceptionally high fire and flash points and meets or exceeds the Inland Waterways and U. S. Coast Guard guidelines for fired thermal fluid heaters used in inland waterway transportation of heated materials. This includes bulk material handling barges and other waterway transport applications.

XCELTHERM® 445FP

High flash point of 445ºF (229ºC) that meets Coast Guard Marine requirements.

Synthetic Thermal Fluids

Hot Oil Heat Transfer Fluids

Silicone Heat Transfer Fluids

Asphalt Industry Heat Transfer Fluids

Process Fluids

System Cleaners and Flushing Fluids

US Coast Guard Approved HTFs

Heat Transfer Fluids

Radcolube CLP

Military Lubricants